Material Safety Data Sheet

Material Safety Data Sheet
DISCLAIMER

INFORMATION ON THIS FORM IS FURNISHED SOLELY FOR THE PURPOSE OF COMPLIANCE WITH OSHA’S HAZARD COMMUNICATION STANDARD, 29CFR 1910.1200 AND SHALL NOT BE USED FOR ANY OTHER PURPOSES

SECTION I
Identity (as used on label): MOLY RESIN Grayish Black, Semi-Gloss Black Flat Black, Green, White, Gray, Stainless, Tan, Brown, Clear
Chemical Names: Solid Film Lubricant Coating (thermal cure)
Chemical Family: Specialty Phenolic Resin
Formula: Complex Mixture
Blended and Bottled by: John Norrell Inc., 13529 Saddle Hill Dr., Little Rock, AR 72212
Hazardous Materials ID System (HMIS)
Health: 2 Flammability: 3
Reactivity: 0 Special Note: none
SECTION II - Hazardous Components and Toxicity
Concentrations
Phenol (Cas # 108-95-2) Trade Secret
ACGIH TLV: 5 ppm (skin) OSHA PEL: 5 ppm (skin)
It is a severe skin and eye irritant in rabbits. Carcinogenicity: animals and humans – no
Ethanol (CAS #64-17-5) <30%
ACGIH TLV: 1000 ppm OSHA PEL: 1000 ppm
Mild irritant to rabbit skin and a sever eye irritant. Oral consumption by humans causes intoxication and gastrointestinal distress. Carcinogenicity: animals and humans- no
Molybdenum Disulfide (CAS #1317-33-5) Trade Secret
ACGIH TLV: 10 mg/m3 as MO OSHA PEL: 10 mg/m3 as MO
May be slightly irritating. Carcinogenicity: animals and humans – no
Methyl Ethyl Ketone (Cas # 78-93-3) >50%
ACGIH TLV: 200 ppm OSHA PEL: 200 ppm OSHA STEL: 885 mg/m3
Eye and skin irritant and may cause CNS in humans if inhaled in concentration stronger than 125 ppm.
Carcinogenicity: animals and humans – no
P.M. Acetate (Cas # 108-65-6) Trade Secret
ACGIH TLV: No Listing OSHA PEL: No Listing
No adverse toxicity information available. Carcinogenicity: animals and humans – no
Methyl Isobutyl Ketone (Cas 3 108-10-1) <10%
ACGIH TLV: 50 ppm OSHA PEL: 50 ppm
Irritating to the eyes and mucous membranes. It is a narcotic in high concentrations
Carcinogenicity: animal and humans – no
Residual Formaldehyde (Cas # 50-00-0) Trace
ACGIH TLV: 1ppm OSHA PEL: 3 ppm
Irritating to skin, eyes, and mucous membranes. Carcinogenicity: Animals-yes, humans-indefinite
Freon TF (Cas # 76-13-1) <10%
ACGIH TLV: 1000 ppm OSHA PEL: 1000 ppm
Mild rabbit skin irritant. Over exposure in humans may cause skin irritations and CNS effects in humans.
Carcinogenicity: animals and humans – no
Cellosolve Acetate (Cas # 111-15-9) Trade Secret
ACGIH TLV: 5 ppm (skin) OSHA PEL: 100 ppm (skin)
Mild eye and skin irritant. Carcinogenicity: animal and humans – no
Stainless Steel (Powder)* (Cas # 7429-90-5) <10%
ACGIH LTV: No Listing OSHA PEL: No Listing
* used only in the Stainless Steel Moly Resin
Inhalation of powdered metals has been reported to cause pulmonary fibrosis.
Carcinogenicity: animals and humans – no
Inorganic Barium Compound <10%
ACGIH LTV: 0.5 mg/m3 OSHA PEL: 0.5 mg/m3
Mild skin and eye irritant. Carcinogenicity: animals and humans- no
Toluene (Cas #108-88-3) <10%
AGCIH TLV: 100 ppm OSHA PEL: 100 ppm
Suggested to cause liver damage in animals if ingested
Carcinogenicity: animals and humans – no
Isopropyl Alcohol (Cas # 67-63-0) Trade Secret
AGCIH TLV: 400 ppm OSHA PEL: 400 ppm
Irritant to eyes, nose and throat. Carcinogenicity: animals and humans- no
Xylene (Cas #1330-20-7) <10%
ACGIH TLV: 100 ppm OSHA PEL: 100 ppm
Mild skin irritant in rabbits and a severe eye irritant. Carcinogenicity: animals and humans- no
SECTION III - Chemical & Physical Characteristics
Boiling range 165 f. to 180 f.
Density 8.1
Vapor Pressure NA
Melting Point NA
Vapor Density (air =1) >1
Evaporating rate NA
Solubility in H2O Moderate
Appearance / Odor Gray-black liquid, organic solvent odor Silver colored liquid, organic solvent odor
Volatile Organic Compound 672
SECTION IV - Fire and Explosive Hazard Data
Flash Point: 50 f.
Flammable Limits: LEL 4.3, UEL 19.0
Extinguishing Media: CO2, Foam, Dry Chemical, or Halon
Special Fire Fighting Procedures: None
Unusual Fire and Explosive Hazards: None
SECTION V - Reactivity Data
Stability: Stable
Conditions to Avoid: Open flame
Incompatibility Strong
Decomposition: Irritating and toxic fumes
Complex Hydrocarbons
Hydrogen Sulphide and Sulfur Dioxide
Polymerization: Will not occur
Conditions to Avoid: None
SECTION VI - Health Hazard Data
Threshold Limit Value: Not determined for product, see Section II
Route of Entry: Inhalation, skin, and ingestion
Health Hazards: Eyes – can cause irritation, redness, blurred vision.
Skin – prolonged contact can cause irritation, dermatitis.
Inhalation – dizziness, nausea, fatigue, headache, unconsciousness or asphyxiation
Ingestion – can cause nausea, vomiting, and diarrhea
Emergency and First Aid: Eyes – flush with copious amounts of water, get medical attention
Skin – wash with soap and water
Inhalation – remove to fresh air. If breathing is impaired, get medical attention.
Ingestion – do not induce vomiting, keep warm, and get medical attention.
SECTION VII - Precautions for Safe Handling and Use

Steps to be taken in case material is released or spilled:

Clean spill with absorbent material, Eliminate ignition sources, wear gloves, goggles, and gas mask if ppm are exceeded,.

Waste disposal method -Dispose of waste in chemical land fill as approved by local, state and federal laws and regulations.

Precautions to be taken in handling and storing: Ventilate area away from acids, alkalis, and open flames

Other Precautions: None

SECTION VIII - Control Measures
Respiratory Protection: Use NIOSH approved organic respirator if ppm limits are exceeded.
Ventilation: Local Exhaust – used to maintain levels below toxic ppm
Mechanical – use non-sparking or open flame equipment.
Special: None
Other: None
Protective Gloves: Chemical resistant gloves
Eye Protection: Wear safety glasses or goggles
Other Protective Equipment or Practices: None

The shop will be closed from 5/25 - 6/1 All orders made during this time will be shipped on 6/2 when we return. We apologize for any inconvenience. Dismiss